General Settings
      Back to home
      1. Knowledge base
      2. Admin
      3. General Settings

      Import Used SKUs & Barcodes (PRO

       

      BEFORE USING BARCODES


      Remember to read the article Barcodes - Admin Setup before you start using this module. 

      HOW TO IMPORT USED SKUs AND BARCODES


      You can import used SKUs and their associated barcodes to Delogue PLM and assign old barcodes to new SKUs.


      Go to the Admin section and:


      1) Select ‘General Settings’ from the left menu and choose the ‘Barcodes’ on the top tab.



      2) Here, you will find a section called 'Import' where you can upload your SKU and barcodes file. Click the 'Choose file' button first, select the file on your computer and click 'Import used SKUs & Barcodes' button.



      The file format will be (please notice that the delimiter used here is "-"):


      SKU;Barcode

      100-Red1-XS;5704872720503

      100-Red1-S;5704872720510

      100-Red1-M;5704872720527


      It is extremely important that the delimiter that is set up in Delogue PLM is the exact same delimiter used in the file you import.

      The system will then check if SKU already exists and if already has an assigned barcode. If an SKU and/or barcode don’t exist in the system, you will have to create one and assign it to the SKU.


      You can keep track of all your imported SKUs and barcodes in the Admin section. Here’s an example of the messages the system will show regarding SKUs status:


      - File Uploaded Successfully! The SKU 100.12345.S already has assigned barcode. The Barcode 5704872694219 is already linked to other SKU. The SKU 100.12345.XL already has assigned barcode. Only 0 sku-barcodes imported of the 3 in the file. 

      NEXT STEP: